SAN: Automated sanitary solutions for body temperature measurement and disinfection.

Solutions sanitaires automatisées de FASTCOM Technology SA

For more than 20 years, FASTCOM Technology SA has specialized in secure solutions for people flow control people flow control.

FASTCOM completes its range of security airlocks with the sanitary airlock solutions described in this document. These automated sanitary solutions allow a better screening and a more efficient disinfection for generalized and systematic control.

 

The characteristics of the sanitary airlock solutions are as follows:

  • Automated control for better efficiency and reliability

  • Allows systematic and generalized control

  • Mobile and/or fixed solutions

  • Possible controls/action :

    • Measure body temperature

    • Disinfect hands

    • Distribute masks

    • Disinfect people physically against viruses and other germs.

Situation

The coronavirus epidemic is highly infectious and causes many contagions. Under these circumstances, routine screening and isolation of new cases is the highest priority.

To do this, automated solutions must be put in place to measure body temperature, disinfect hands, distribute masks and, when possible, disinfect people.

Compared to a manual approach, these automated solutions ensure to:

Reduce the risk of cross-infection

Automated solutions require little or no human intervention, reducing the risk of cross-infection.

Increase efficiency and systematize checks

Due to their speed of processing, automated solutions allow a significant increase in the number of people checked. With companies going back to work, students returning to school, large train stations, airports and busy infrastructures, automated solutions allow for generalization of checkpoints and processing.

Improve reliability for widespread control

Automated solutions are more reliable because they do not require human intervention, the latter being, by definition, prone to attention and/or fatigue problems.

Solution DD: Body temperature measuring and disinfection airlock

The DD airlock is an integrated solution that automatically measures the temperature and disinfects hands and body. This solution can be mobile.

The solution has an automatic temperature measuring area, completed by an automatic hand washing dispenser and a mask dispenser. The solution also has an ultraviolet disinfection lamp, ozone disinfection and a foot disinfection device. Thus, the DD solution can effectively eliminate viruses and other germs and prevent them from entering the protected area.

Features:

  • The equipment is divided into two functional areas. The first zone is a control zone, comprising an automatic temperature measurement, an automatic hand sanitizer dispenser and a mask dispensing box. The second zone is a disinfection zone, including UV disinfection, ozone disinfection and spray disinfection.

  • In the temperature measurement area, facial recognition and dual identification technology is used and an alarm will be raised if the temperature is too high.

    • The temperature measurement can be used in combination with the original access control system and can be connected to the existing attendance and visitor management system.

  • The disinfection zone starts automatically as soon as the person enters the disinfection zone.

  • The physical length of the disinfection zone depends on the checks required by the customer.

  • The solution can be assembled on site, which is convenient and fast.

  • The ultraviolet disinfection lamp can be switched on as required to effectively eliminate the virus and other germs. In addition, there are spraying devices and liquid tanks. Different disinfectants can be used depending on the requirements.

  • There is a liquid collection device at the bottom, which can collect the disinfectant for centralized treatment.

  • The passage is fast and safe.

Solution DE: Body temperature measuring airlock

The DE airlock allows fast temperature measurement outside or inside buildings. This solution can be mobile. The solution can also incorporate a hand disinfector, which automatically sprays a hydro-alcoholic solution, and a mask box.

Features:

  • Combined design, can be used indoors and outdoors.

  • It can be used in combination with the customer’s access control system and can be connected to the existing management system and the visitor management system.

  • The temperature measurement uses an 8-inch IPS liquid crystal display.

  • The temperature measurement accuracy is 0.3 ℃, for a measurement distance of less than 1 meter.

Solution DI: Disinfection airlock

The DI airlock offers a solution for automatic disinfection. This solution can be mobile. People can make the passage quickly without stopping.

 

Features:

  • The disinfection zone switches on automatically as soon as the person accesses the disinfection zone.

  • The physical length of the disinfection zone depends on the checks required by the customer.

  • The solution can be assembled on site, wich is convient and fast.

  • The ultraviolet disinfection lamp can be switched on as required to effectively eliminate viruses and other germs. In addition, there are spraying devices and liquid tanks. Different disinfectants can be used depending on the requirements.

  • There is a liquid collection device at the bottom, which can collect the disinfectant for centralized treatment.

  • The passage is fast and safe.

Solution DE-T: Body temperature measuring door/lock

The DE-T door/lock is a temperature sensing door and is a fixed (i.e. not mobile) piece of equipment. If the temperature of the person passing through exceeds a predefined value, an alarm is triggered.

Features :

  • Precise temperature detection.

  • Possible control of the detection sensitivity.

  • Modular design for quick installation.

  • Robust construction.

Solution TH: Hand Thermometer

The TH solution is a non-contact infrared forehead thermometer with a measuring time of one second. It allows the remote control of the body temperature in a simple and fast way.

Solution SM: Simultaneous body temperature measurement system

The SM solution allows the temperature control of several people at the same time. The system is based on infrared thermography and can be used in public places.

 

Features:

  • Temperature measurement in milliseconds

  • Remote detection

  • Dynamic measurement during the movement of people

  • Manages up to 20 people at the same time

  • Automatic statistics

Fields of application

Fields of application are given below.

Hospital

Offices - tertiary zone

Factory - production area

Public infrastructure

Shop - shopping center

Train station - subway

School, training center

Building site

Airport

Law enforcement

Fastcom_logo_white_transparent.png
  • YouTube - White Circle
  • LinkedIn - White Circle
Copyright 2020